2W151B Munitions Systems Journeyman Volume 1 Practice Test

These questions are part of the practice quiz. Start practicing

• Which feature is particularly important for the efficient operation of the MJ-1A/B lift truck?
• What type of movement do bomb lift truck rollers provide during loading?
• What action can be taken if a “red flag” is identified during an inventory audit?
• How does changing the position of the MJ-1B accelerator pedal affect the vehicle?
• What is the maximum static load that the B-1 maintenance stand can sustain?
• What type of stand is the C-1 maintenance stand categorized as?
• What is the correct method for installing extension lift arms on the MJ-1A/B lift truck?
• The split-deck maintenance platform is currently in use with which aircraft?
• What type of load binder is attached to bomb support beams?
• What is a Critical Task in munitions operations?
• Which of the following is NOT a step taken during munitions loading operations?
• What is the height range in feet of the B-1 maintenance stand?
• Which safety measures should be taken when handling munitions?
• What is the role of a Safety Data Sheet (SDS) in handling munitions?
• In munitions safety management, what role does personnel training play?
• What is the capacity in rounds of the 20 mm linkless ammunition loading system (LALS)?
• What is the platform height range in feet for the B-4 maintenance stand?
• What is the distance requirement exemption for fighter aircraft regarding the APU?
• Which of the following best describes the purpose of safety regulations in munitions handling?
• Describe the role of a munitions systems journeyman.
• What is the primary purpose of a risk assessment in munitions operations?
• What is the purpose of the hydraulic hand pump located on the right-hand side of the MHU-83 lift truck?
• What is one of the fundamental responsibilities in munitions safety training?
• Which air compressor is commonly used to operate small pneumatic tools?
• What is the primary component that allows the lift truck to operate effectively?
• What is the air pressure produced by the MC-2A air compressor?
• The independent operation of either lift arm mechanism on the MHU-196/M lift trailer results in what effect?
• What should be done if the hydraulic system fails during a loading operation?
• What loading controls are available only on the MJ-40 lift truck remote?
• Which Air Force Technical Order (AFTO) forms are used to document defects found on aerospace ground equipment (AGE)?
• What happens when the tape switches of the split deck maintenance platform detect an obstruction?
• Where are the controls for adjusting the side frame width of the MHU-83 lift truck located?
• Which component is utilized with the MHU-83-series lift truck to load external heavy stores on a B-52?
• Before attempting to loosen fittings or remove hoses on the SGNSC, what precaution is necessary?
• In addressing explosive hazards, what does the classification 'HD' stand for?
• Which panel(s) of the MJ-2A hydraulic test stand has most of the operating controls?
• What is the operational significance of the Weapon Storage and Maintenance System (WSMS)?
• Why is it crucial to ensure aircraft fittings are clean before attaching hydraulic servicing hoses?
• Why is proper PPE important in munitions operations?
• What is the maximum air pressure allowed for cleaning equipment or work areas?
• How many operators are required to be present during the operation of the A/M 32C-10 air conditioner?
• How long must the lights of a FL-1D floodlight remain off before restarting?
• What is essential for maintaining accurate inventory records in munitions management?
• What is the lift capacity of a MJ-1 lift truck with aluminum rollers installed?
• When forklift adapters are installed on lift trucks, what device must be used?
• What must be followed for disposing of munitions that are no longer serviceable?
• Which fuel types can the MHU-83 lift truck utilize?
• How is "hazardous material" defined in relation to munitions?
• What does the term “build-up” refer to in the context of munitions?
• What does the term "munition types" refer to?
• What does the acronym "T.O." signify in the context of munitions?
• What is a primary function of the X-Y pads on the MHU trailers during operation?
• What is the role of training in munitions safety?
• How many main rail assemblies can be installed on an MHU-110/M trailer?
• Which A/M 32A-86 control panel contains the gauges for monitoring output voltage and amperage?
• Which additional piece of aerospace ground equipment (AGE) is required during the operation of the polyalphaolefin (PAO)/air cooling cart?
• What type of communication is essential when working with munitions?
• What is the lifting capacity of the MJ-40 lift truck?
• Which additional piece of aerospace ground equipment (AGE) generator set is required during operation of the A/M 32C-10 air conditioner?
• Which maintenance stand is described as a scissors-type, with a variable-height platform?
• What must be ensured regarding ventilation when venting the SGNSC storage tanks?
• If hydraulic fluid comes in contact with your eyes during an operation, what is the immediate action required?
• What is the primary goal of compliance with safety regulations in munitions handling?
• Which component of the linkless ammunition loading system (LALS) transfers rounds into the gun system's loading adapter?
• What are the key elements of a munitions maintenance plan?
• Which of the following is an environmental concern related to munitions disposal?
• What inspection is crucial for maintaining the operational safety of the MHU-83 lift truck?
• What happens when the "deadman" switch is released on the PCU?
• Where is the cool-air hatch located on the MJ-2A hydraulic test stand?
• Where is the hand pump for raising the B-4 maintenance stand located?
• What defines a Controlled Item in munitions terminology?
• What type of drive system is utilized by the MJ-1/B lift truck?
• How can preparation enhance safety in munitions operations?
• In terms of usability, the C-1 maintenance stand can serve as which of the following?
• Which feature of the MHU-83 lift truck provides stability during lifting operations?
• How does the principle of prevention contribute to munitions safety?
• What is the lift capacity of the MHU-204/M and MHU-196/M lift trailers?
• What is the lift capacity of the MHU-83 lift truck?
• Why is it essential for munitions personnel to stay updated on new technologies?
• Which auxiliary power unit serves as an external power source for the MQ-1 and MQ-9 aircraft?
• What is the maximum height of the mechanical ram assembly (MRA) when fully extended?
• What procedural aspect is critical for munitions that are no longer usable?
• In which position must the FL-1D floodlight's platform be placed during towing?
• What is the function of the Integrated Maintenance Data System (IMDS)?
• What is a key consideration to prevent personnel injury when using the MHU-204/M and MHU-196/M lift trailers?
• In what way do environmental regulations affect munitions operations?
• Which feature of LALS is critical for ensuring the correct ammunition transfer?
• What can be included in non-explosive components?
• Before connecting or disconnecting a high-pressure service hose, what must you ensure?
• What are the classification categories for explosives based on their hazards?
• What function does the Munitions Accountability System (MAS) serve?
• What is the primary objective of munitions storage area security?
• Why is documentation important in munitions movement?
• What is the total lift capacity of the split-deck maintenance platform?
• What does effective personnel training in munitions management include?
• Which bomb loading adapter is required for loading internal and external stores on the B-52?
• What component of the MHU-83 lift truck is used to lift the front wheels off the ground for side frame width adjustment?
• Which component of the MHU-196/M lift trailer supports the lift arms during transport conditions?
• What is the risk associated with allowing waste gases to accumulate in an enclosed space when using the SGNSC?
• Which bomb support rollers may be used with roller extensions?
• What is the primary function of the cradle assembly in the lift truck system?
• Which maintenance stand is referred to as a nonadjustable 4-foot platform?
• Who is primarily responsible for munitions accountability?
• How is the mechanical ram assembly (MRA) primarily controlled and operated?
• What weight limit is established for the MJ-40 and MHU-83 series lift truck when using the fork adapter assembly?
• What attaches the fork adapters to the MHU-83-series lift truck's table assembly?
• What is the lift capacity of the mechanical ram assembly (MRA)?
• What is a defining feature of the B-5 maintenance stand?
• Which device ensures the boom cannot fall in the event of a hydraulic power loss or component failure on the MHU-83 series lift trucks?
• In the A-10 ammunition loading system (ALS), which component interfaces with the aircraft during ammunition loads?
• What does Munitions Inventory Management focus on?
• How is the parking brake on the MHU-83 lift truck set?
• What is an indicator of a potential explosive hazard?
• How does regular inventory conducting impact munitions operations?
• Which aircraft is NOT mentioned as a supported loading mission for the MJ-40 lift truck?
• How many hand brake levers are located on the MHU-226/M munitions handling trailer?
• Which power supply unit is used in conjunction with the FL-1D floodlight for MQ-1 and MQ-9 aircraft?
• What source is the output of the A/M 32A-95 Gas Turbine Compressor?
• Which method is recommended for secure transport of munitions?
• Which of the following is a critical component of handling munitions safely?
• For round-shaped stores, how many trolleys and chocks can be configured on the MHU-110/M trailer?
• What documentation is essential for the movement of munitions?
• Why must munitions personnel adhere to high standards of discipline?
• What do “red flags” during inventory audits typically indicate?
• What is the lifting capacity of the davit on the split deck maintenance platform?
• How is the term "non-explosive components" defined in munitions?
• Where does the ammunition loading assembly (ALA) of the A-10 gun system get its power during normal loading?
• For the operation of the A-10, where can ammunition loading assembly get its operational power?
• What must be ensured before making or breaking a connection between the polyalphaolefin (PAO)/air cooling cart and the aircraft?
• What should be done when reporting a munitions-related incident?
• What type of munitions can an operator not use near an auxiliary power unit (APU) during practice loading?
• What component in munitions accounts for guided weapon systems' precision?
• During towing, what is the maximum travel angle of the tow bar of the MHU-204/M and MHU-196/M lift trailers?
• Which maintenance stand can be used independently or installed as an extension on the B-1 maintenance stand?
• What is the platform height range, in feet, of the B-5 maintenance stand?
• What is typically included in a risk assessment for munitions operations?
• What safety feature automatically shuts off each operational mode of the MHU-204/M and the MHU-196/M lift trailers?
• Which explosive is commonly used in military munitions?
• What is the primary purpose of the davit on the split-deck maintenance platform?
• What is defined as a device that triggers an explosive or starts a chain reaction in munitions?
• Which aircraft loading missions can be supported by the MJ-40 lift truck?
• What is essential to ensure when conducting component testing in munitions systems?
• Which action should be taken if munitions packaging shows visible damage?
• What type of power does the starter cart assembly (SCA) provide to the MA-1 and MQ-9 aircraft?
• What should personnel prioritize to enhance munitions safety?
• What component of the hydrostatic drive system holds the munition or stores to be loaded?
• How far from the supported aircraft should the A/M 32C-10 air conditioner be positioned for optimum operating efficiency and safety?
• Which aircraft requires personnel to use the self-generating nitrogen servicing cart (SGNSC)?
• Which truck has a higher lift capacity, the MJ-40 or the MHU-83?
• Which of the following is a typical procedure after a munitions accident?
• What is a primary outcome of effective safety management in munitions?
• What is the maximum amount of bleed-air pressure that may be applied to the A/M 32C-10 air conditioner?
• Pylons on pylon handling adapters are mounted or removed from aircraft using what?
• What is the primary goal of munitions technical training?
• Why is it critical to verify measurements during munitions loading?
• Where is the control panel of the starter cart assembly (SCA) located?
• What is the significance of the Air Force Technical Order (AFTO) in munitions operations?
• What is the minimum air pressure required in the compressor tank before loading with the MHU-196/M lift trailer?
• What is the lift capacity of an MHU-83 lift truck with aluminum rollers installed?
• What should be verified regarding the load when operating an MHU trailer?
• What should personnel emphasize during safety inspections of munitions?
• Which aspect of new technology is particularly beneficial for munitions personnel?
• How many different outputs can the A/M 32A-60 generator provide?
• What power output of a portable floodlight set is used for common electrically powered hand tools?
• What action should be taken in the event of a munitions accident?
• Why are designated storage locations important for munitions?
• Which activity is included in munitions loading procedures?
• If the split-deck maintenance platform's tape switches detect an obstruction, what functions will they stop?
• What is the main function of the Ammunition Supply Chain in munitions systems?
• During the pre-use inspection of aerospace ground equipment (AGE), what action must the operator perform?
• Which of the following is a function of the MHU-83 lift truck?
• Which powered bomb lift trucks are the most commonly used?
• Which of the following are key principles of munitions safety management?
• What is the purpose of a munitions standard operating procedure (SOP)?
• What is the lifting capacity of the sling assembly used on lift trucks or forklift adapters?
• Which unit is the only auxiliary power unit (APU) to provide both electrical and pneumatic power?
• What is the maximum lifting height when the adapter assembly is inverted on the MHU-83-series lift truck?
• What is the primary purpose of munitions systems in the Air Force?
• What is the purpose of conducting a munitions safety inspection?
• What is "component testing" in munitions systems?
• In terms of safety, what needs to be pressed to shut off the operational mode of the trailers?
• What is the purpose of the remote control unit in operating the mechanical ram assembly?
• What is an Explosive Safety Quantity Distance (ESQD) arc?
• What does the term "munitions maintenance" encompass?
• Which component assists in the side frame width adjustment of the MHU-83 lift truck?
• Where can personnel find current regulations regarding munitions safety?
• What type of locks does the MHU-196/M use to secure the lift arms under transport conditions?
• How often should munitions personnel conduct inventories?
• Where does the mechanical ram assembly (MRA) get its power from?
• Which A/M 32A-60 control panel has the switches and controls necessary to operate the direct current (DC) generator?
• Are floodlight receptacles allowed to be used for external power to operate accessories?
• Which one of the following items is affected when the MJ-1/B accelerator pedal is adjusted?
• What controls the engine speed of the MJ-1/B lift truck?
• Which components on the MHU-204/M and MHU-196/M lift trailers allow for precise positioning corrections during lifting operations?
• Why are regular safety drills important in munitions operations?
• Which panel of the A/M 32A-86 generator set has the circuit breaker for overload protection?
• Which variant of the MHU-83 lift truck incorporates remote control and hydraulic servicing lines?
• How many fluid temperature modes are available on the polyalphaolefin (PAO)/air cooling cart?
• What is the main benefit of using quick-release pins on a lift truck?
• What is the difference between a hazard and a risk in munitions safety?
• During which phase of munitions operations is planning fundamental?
• How full should an unmodified A/M 32A-95 Gas Turbine Compressor fuel tank be filled?
• How many instrument/control panels must the operator use during operation of the A/M 32A-86 generator set?
• What type of load can the MJ-40 and MHU-83 series lift truck handle with the fork adapter?
• What is commonly used to secure items when using forklift adapters?
• What mechanism is primarily affected by independent operation of lift arms on the MHU-196/M?
• What is the maximum load capacity of a MHU-141/M trailer?
• What is the maximum load capacity of an MHU-110/M trailer?
• How do munitions personnel ensure compliance with federal regulations?
• What should be prioritized in munitions maintenance procedures?